|
_______________________________________________________
SILVER ALLOYS
SILVER ALLOYS SILVER ALLOYS
_______________________________________________________
- FERRITE 35 - SILVER BEARING BRAZING WIRE
-------------------------------------------
Flux-free
copper base brazing alloy to join copper to copper base alloys. It can also be used in joining steel, brass, bronze by using
FERRITE FLUX 91. The filler metal penetrates through very tight joint gaps (.002"). LOW HEAT, DUCTILE AND VERY GOOD CAPILLARY
FLOW. NO Cadmium - NO Lead.
APPLICATIONS:
Electric Motor Repair, Armatures, Rotors, Electric Contacts, Marine,
Repairs, Air Conditioning Equipment, Bus Bars, Heaters and Condensers, Electric Appliances, Plumbing Parts, Copper Pipes,
Coil Tubing, Heat Exchangers, and Bronze Castings.
OPERATION: OXY-ACETYLENE
TENSILE STRENGTH: 60,000 PSI
JOINING TEMPERATURE: 1310 - 1475 F
FLUX: FERRITE FLUX 91
SIZES: 1/16 x .050 x 18" and 1/8 x .050 x
18"
- FERRITE 46F - SILVER BRAZING ALLOY
-------------------------------------------
Ferrite
46F is FLUX coated cadmium free silver brazing alloy to join stainless steel, mild & high carbon steel, carbides, nickel
alloys, copper, brass and bronze. It joins metals in any combinations. It is high strength silver alloy which
flows through very thin gaps. A particular advantage of this alloy is low heat, ductile and capillary flow (less than
0.005" gap).
APPLICATIONS:
Surgical Instruments,
Dairy Parts & Vessel, Meat Processors, Metal Furniture, Joining Carbide, Drills, Tool Die Shop, Electrical Appliances,
Plumbing Parts, Bronze Castings. OPERATION: OXY-ACETYLENE
TENSILE STRENGTH: 85,000 PSI
JOINING TEMPERATURE:
1125 TO 1200 F
SIZES: 1/16 x 18 and 3/32 x 18
- FERRITE 83 -
SILVER SOLDER WIDER
-------------------------------------------
Ferrite 83 is available in either acid or rosin
flux cored wire. Designed to solder stainless steel, copper, brass, bronze and nickel alloys. The solder can also
be used to join similar or dissimilar alloys. This solder is not for Aluminum or Magnesium. This is a low temperature,
425 F, solder.
APPLICATIONS:
Electrical Motor Repair,
Armatures, Rotors, Electrical Contacts, Air Conditioning Equipment, Electrical Appliances, Plumbing Parts, Copper Pipes, Coil
Tubing. OPERATION: OXY-ACETYLENE
TENSILE STRENGTH: 22,000 PSI
JOINING TEMPERATURE: 425 F
SIZES:
1/16 x 9' tube, 1/16 x 1 lb and 1/8 x 1lb
Other Silver Alloys are
available upon request!
|
