FERRITE WELDING PRODUCTS


HomeProduct GuideSteel/Cast AlloysSilver/Brass/BronzeHardfacing

Reducing Your Downtime Improves Productivity
 

  • MAINTENANCE WELDING IS A CHALLENGE! UNLIKE MANUFACTURING, YOU MAY BE UNAWARE OF THE EXACT COMPOSITION OF THE BASE METAL NEEDING REPAIR.  OUR PRODUCTS ARE DESIGNED WITH MAINTENANCE IN MIND.  WHEN TIME IS IMPORTANT YOU CAN MAKE YOUR REPAIRS WITH CONFIDENCE USING OUR "MULTI-PURPOSE" ELECTRODES, MIG, TIG, AND BRAZING PRODUCTS.


    ________________________________________________________

    STEEL ALLOYS            STEEL ALLOYS           STEEL ALLOYS
    ________________________________________________________

  • FERRITE 32F - PREMIUM BRAZING WIRE
    ----------------------------------------------
    Ferrite 32F is a super strength nickel-silver flux coated brazing wire for joining all steels, cast iron, copper, brass and bronze alloys.  It joins similar or dissimilar metals and flows through sizeable gaps.  Ferrite 32F is very suitable for high temperature service applications and is three times stronger than silver solder.

    APPLICATIONS:
    Tubular Chassis, Frames, Drills, Conveyors, Automotive Parts, Mines and Quarries, Tool Die Shops, Tanks, Housings, Plumbing Parts, Ramps, Crank Cases

    TENSILE STRENGTH: 80,000 PSI
    JOINING TEMPERATURE: 1375 - 1600 F
    OPERATION: OXY-ACETYLENE TORCH
    AVAILABLE SIZES: 1/16 x 18, 3/32 x 18, 1/8 x18, 5/32 x 18

  • FERRITE 631 - STEEL WELDING ALLOY
    ----------------------------------------------
    Specially developed electrode for welding mild structural and galvanized steel. Works well even on dirty, oily, and rusty metals. Special flux to "dig" down to base metal and with deep penetration removes all undesirable elements while forming a solid dense weld deposit.

    APPLICATIONS:
    Machinery and Machinery Parts, Galvanized Sheet, Truck bodies, Angles, Tanks and Tank Units, Plates, Beams, Joining all Mild Steel Structures

    OPERATION: AC/DC, Straight or Reverse Polarity
    TENSILE STRENGTH: 80,000 p.s.i.
    ELONGATION: 25%
    AVAILABLE SIZES: 3/32, 1/8, and 5/32
    Also available in MIG and Tig

  • FERRITE 633 - STEEL ALLOY ELECTRODE
    ----------------------------------------------
    Most versatile electrode for welding all mild and common steels. Ideal for the inexperienced welder or the person who does occasional welding. Simplifies all position welding through improved technology.  Allows rapid fabrication of thin or dissimilar gauge steels without danger of burn through. Can be used on rusty or dirty steel. Low amperage with excellent results on small portable AC welding machine.

    APPLICATIONS:
    Sheet Metals, Galvanized Steels, Truck Bodies, Angles, Tanks, Galvanized Containers, Plates, Beams, Joining Mild Steels

    OPERATION: AC/DC - Straight or Reverse Polarity
    TENSILE STRENTGH: 80,000 PSI
    ELONGATION: 29%
    AVAILABLE SIZES: 1/16, 3/32, 1/8, and 5/32 and Combination Pacs
    Also available in MIG and TIG


  • FERRITE 639 - HI-STRENGTH ALLOY
    ----------------------------------------------
    Hi-Strength all position for general repairs on low alloy, high strength steels including T1, HY 80, HY 90, Jalloy 90/100, Cor-ten, and all types of newer type construction steels. High strength, non-cracking weld deposit even on rusty, contaminated and dirty metals.


APPLICATIONS:
Construction Equipment, Machine Bases, Truck Chassis, Crane & Shovel Booms, "I" & "H" Beams, Plates, Angles, Beams, Joining All Mild Steel Structures

TENSILE STRENGTH: 120,000 p.s.i.
ELONGATION 28%
HARDNESS: 237 BHN
OPERATION: AC/DC - Reverse Polarity
AVAILABLE SIZES: 3/32, 1/8, and 5/32 and Combination Pacs


  • FERRITE 642 - PREMIUM STEEL ALLOY
    ----------------------------------------------
    Premium Steel alloy specifically developed for welding and joining all steels and all combinations of similar and dissimilar steels. Unique operating characteristic of this alloy produce superior, high strength, crack- free deposits on steels of unknown composition and hard to weld steels. Corrosion and heat resistant, fully machinable, no spatter or undercutting and easy slag removal.

    APPLICATIONS:
    Crane Booms, Tool Steel, Gear Teeth, Chain Links, Pressure Vessels, Dies, Worn Drive & Sprockets, Cam Shafts, Cylinders, Lift Truck Forks, Axles

    OPERATION: AC/DC Reverse Polarity
    TENSILE STRENGTH: 125,000 PSI
    ELONGATION: 36%
    AVAILABLE SIZES: 1/16, 3/32, 1/8, AND 5/32 and Combination Pacs
    Also available in MIG and TIG


  • FERRITE 643 - ULTRA HIGH STEEL ALLOY
    ----------------------------------------------
    Ultra high alloy providing outstanding strength and weldability on most difficult to weld maintenance and repair steels. Excellent for welding and joining all types of dissimilar steels including tool, cast, high alloy, nickel alloys, stainless, spring and hard steels. Heat and corrosion resistance, shock and impact resistance, out of position, fully machinable.

    APPLICATIONS:
    Chassis Frames, Cast Steel Machines, Gear Teeth and Gears, Cylinders, Springs, Pressure Vessels, Worn Drive and Sprockets, Cam Shafts, Shafts.

    OPERATION: AC/DC Reverse Polarity
    TENSILE STRENGTH: 129,000 PSI
    ELONGATION 39%
    AVAILABLE SIZES: 3/32, 1/8, 5/32 and Combination Pacs
    Also available in MIG and TIG


  • FERRITE 647 - VERTICAL DOWN STAINLESS ALLOY
    ----------------------------------------------
    The Most Successful "VERTICAL DOWN" stainless steel alloy available in the welding industry. Designed to weld on all grades of 300 series stainless steel including the extra low carbon version in the vertical down position and all positions. Highly resisant to inter-granular corrosion. Excellent slag removal. Easy to run with outstanding re-strike capability. Moisture resistant flux coating.

    APPLICATIONS:
    Pipe Lines, Sheet Metal, Tanks and Hospital Equipment, Valves, Food Industry Equipment

    OPERATION: AC or DC REVERSE POLARITY
    TENSILE STRENGTH: 83,000 PSI
    ELONGATION: 40%
    AVAILABLE SIZES: 3/32 and 1/8

  • FERRITE 648 - STAINLESS ALLOY
    ----------------------------------------------
    Ferrite 648 welding electrode is developed to weld for all types of 300 series type and the extra low carbon stainless steels.  The special alloy content prevents pitting where acids are encountered making it ideal for the paper and chemical industries.  It can also be used for dairy and distillery equipment and any industry where high corrosion resistant is needed.

OPERATION: AC or DC REVERSE POLARITY
TENSILE STRENGTH: 90,000 PSI
ELONGATION: 52%
AVAILABLE SIZES: 1/16, 3/32, 1/8 and 5/32

  • FERRITE 649 - STAINLESS ALLOY
    ----------------------------------------------
    Special Stainless Steel Alloy designed to produce ultra high temperature and corrosion resistant weld deposits.

    OPERATION: AC or DC REVERSE POLARITY
    TENSILE STRENGTH: 85,000 PSI
    ELONGATION: 40%
    AVAILABLE SIZES: 1/16, 3/32, 1/8 and 5/32

    Also available in TIG

    _______________________________________________________

    TOOL STEEL                 TOOL STEEL                   TOOL STEEL
    _______________________________________________________

  • FERRITE 660 - TOOL STEEL ALLOY
    ----------------------------------------------
    Designed to weld H-11, H=12, H-13 typehot work tool steels. The alloying elements and unique welding characteristics make this electrode compatible with a wide ariety of other tool steels.

    Please call for additional information.
    Also available in TIG

    OPERATION: AC or DC REVERSE POLARITY
    DEPOSIT HARDNESS: Rc58 as welded, Rc60 heat treated
    AVAILABLE SIZES: 3/32, 1/8 and 5/32

    ________________________________________________________

    CAST IRON ALLOY     CAST IRON ALLOY    CAST IRON ALLOY
    ________________________________________________________


  • FERRITE 2550 - CAST IRON PROBLEM SOLVER
    ----------------------------------------------
    Developed to weld all types of Cast Irons including Gray, Nodular and Malleable, as well as Cast Iron to Steel. This electrode welds cast iron without cracking and is fully machinable. Welds over grease, dirt and oil soaked castings. No preheating is required.

    APPLICATIONS:
    Machine Bases, Piping and Equipment, Pumps, Motor Cases, Farm Equipment, Transmission Housings, Hydraulic Cylinders.

    OPERATION: AC or DC REVERSE POLARITY
    TENSILE STRENGTH: 70,000 PSI
    ELONGATION: 20%
    HARDNESS: BHN 180-230
    AVAILABLE SIZES: 3/32, 1/8, 5/32 AND COMBINATION PACS
    Also available in MIG and TIG

  • FERRITE 299 - MOST MACHINABLE CAST IRON
    ----------------------------------------------
    Welding all types of Cast Iron without crackng. The weld deposit is soft and most machinable. The heat affected zone is not hardened and cracks due to carbide formation are avoided. Vertical, overhead and hard to reach repairs can be made without dismantling equipment. Unique flux coating permits fast and smooth deposits with no spattter, even on dirty, oily and grease soaked metal.

    APPLICATIONS:
    Ductile Castings, FoundryDefects, Pumps, Piping, Bell Housings, Gear Boxes, Problem Cast Irons and Heavy Cast Irons

    OPERATION: AC or DC REVERSE POLARITY
    TENSILE STRENGTH: 68,000 PSI
    ELONGATION: 30%
    AVAILABLE SIZES: 3/32, 1/8 and 5/32
    Also available in TIG and MIG

  • FERRITE 100 - GOUGING-CUTTING ELECTRODE
    ----------------------------------------------
    Fastest and most economical cutting electrode for cutting, piercing, beveling, gouging and chamfering all metals such as Cast Iron Stainless Steel, Aluminum, Titanium and Copper Alloys. Removes all types of unwanted metal in seconds. Requires no special equipment or gases. Faster than grinding. Excellent for hard to reach areas. Can be used with standard welding machine and electrode holder.

    OPERATION: AC or DC REVERSE
    AVAILABLE SIZES: 3/32, 1/8, 5/32, 3/16 and Combination Pacs

    APPLICATONS:
    Piercing Holes, Blowing out Rivets, Cutting Stainless and Refractory Metals, Remove Old Metals, Vee out Cracks, Cutting Reinforced Bars, Remove Frozen Bushings, Remove Old Weldments,


    Other Steel and Cast Iron Alloys as well as MIG & TIG Alloys are available upon request!

To suit your needs from the home hobbyist, small shop to the large industrial sites. Small minimum quantities to volume discounts available. Call or email for pricing and sales information.

apr29-05.jpg


FERRITE WELDING PRODUCTS
31 South Passaic Ave.
Chatham, NJ 07928